SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer
Free-pyro black LiNbO3 and LiTaO3 wafers were prepared by chemical reduction. Surface acoustic wave(SAW) devices were fabricated on these black wafers....
SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer
Free-pyro black LiNbO3 and LiTaO3 wafers were prepared by chemical reduction. Surface acoustic wave(SAW) devices were fabricated on these black wafers. Performance of SAW devices showed that pyroelelctric charges were reduced due to the higher conductivity of black wafers and near-ultraviolet light absorption was increased. Therefore, the final test yield of SAW devices was increased 5-10%.
- ManufacturerOST Photonics
- CategoryCrystal Wafer and Substrate
- Lead TimeQuoted per order
- CustomizationSize, orientation and surface finish to drawing
Black- LT and Black- LN Special Features
1 ) High ability of electrical charges neutralization. Black-LT and Black-LN wafers shall neutraliza the electrical charges instantaneously even if any electrical potential occur rapidly and slightly.
2 ) Black- LT and Black- LN shall have no difference at piezoelectric properties from usual LT and LN wafers.
3 ) High uniformity of Bulk resistivity throughout the surface and depth of wafers.
4 ) Bulk resistivity shall be voluntarily controllable at each lever(1.0E+10—9.0E+11Ω *cm)
Typical Specifications
Black-LT wafers
| Orientation | Diameter(mm) | Thickness(mm) | Surface Finish |
| 36°Y-cut42°Y-cut48°Y-cutX-112°Y-cut | 76.2100.0150.0 | 0.350.501.00 | Single Side Polished(SSP)Double Sides Polished(DSP) |
Black-LN wafers
| Orientation | Diameter(mm) | Thickness(mm) | Surface Finish |
| YZ-cut41°Y-cut64°Y-cut127.86°Y-cut | 76.2100.0150.0 | 0.350.501.00 | Single Side Polished(SSP)Double Sides Polished(DSP) |
Other specifications are available on request
Other Crystal Wafer and Substrate Materials
Request A Quote For SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer
Send us your dimensions, orientation, surface finish and quantity. Our engineers reply with a technical proposal and price.
Buyer Questions
How do I get a quotation for the SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer?
Can the SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer be made to a custom specification?
Who manufactures the SAW Grade Free-pyro Black LiNbO3 & LiTaO3 Wafer?
Tell Us What You Need
Send your specification, quantity and destination port. Our engineers reply with a technical proposal and a confirmed lead time.