No. 66, 8 group, Chengbei Village, Yanguan Town, Jiaxing 314411, China
Encapsulated Scintillator

Nd:YAG

Neodymium Doped Yttrium Aluminum Garnet (Nd:YAG) laser crystal is the most early and mature laser material adopted by R&D, medical, industrial and...

Nd:YAG

Neodymium Doped Yttrium Aluminum Garnet (Nd:YAG) laser crystal is the most early and mature laser material adopted by R&D, medical, industrial and military customers. It is the ubiquitous presence for near-infrared solid-state lasers and their frequency-doubler, tripler, and higher order multiplier.

  • ManufacturerOST Photonics
  • CategoryLaser Crystal
  • Lead TimeQuoted per order
  • CustomizationSize, orientation and surface finish to drawing

Nd:YAG Laser Crystal

Advantages

1 ) High gain, Low threshold, High efficiency

2 ) Low loss at 1.06um, Good thermal conductivity and thermal shock characteristics

3 ) Mechanical strength, High optical quality

4 ) Material characteristics allow for various modes of operation (CW, pulsed, Q-switched, mode locked and cavity dumped.)

Specifications

MaterialNd:YAG
Nd Dopant Level0.1- 2.5(+/-0.1)atm%
Orientationor
DimensionDiameter:1-50mm, Length:0.3-220mm(upon customer’s request)
Diameter Tolerance+0/-0.04mm
Length Tolerance+0.5/-0mm
Wavefront Distortion<λ/10 per [email protected]
Chamfer<0.1mm@45°
Damage Threshold>750MW/cm2@1064nm 10ns 10HZ
Clear Aperture>95%
Flatnessλ/10 per [email protected]
Scratch/Dig10-5 @MIL-0-13830A
Barrel Finish50-80 micro-inch(RMS)
Chips<0.1mm
Extinction Ratio>30dB(depends on actual sizes )
Perpendicularity<5 arc minutes
Parallelism<10 arc seconds
Anti-Reflection CoatingR<0.15%@1064nm per surface
High-Reflection CoatingStandard HR coating with R>99.8% @1064nm and R<5%@808nm

Properties

Chemical FormulaNd:Y3Al5O12
Crystal StructureCubic
Lattice Constant12.01Å
Melting Point1970°
Rupture Stress1.3-2.6*103 kg/cm2
Density4.55g/cm3
Mohs Hardness8.5
Thermal Expansion Coefficient[100] Orientation–8.2×10-6/oC (0-250oC)
[110] Orientation–7.7×10-6/oC (0-250oC)
[111] Orientation–7.8×10-6/oC (0-250oC)
Laser Transition4F3/2 –> 4I11/2
Laser Wavelength1064nm
Photon Energy1.86×10-19J
Emission Linewidth4.5Å @1.064µm
Stimulated Emission Cross Section2.7-8.8×10-19 cm2 @Nd 1at%
Fluorescence Lifetime230µs
Refractive Index1.8197 @1.064µm

Request A Quote For Nd:YAG

Send us your dimensions, orientation, surface finish and quantity. Our engineers reply with a technical proposal and price.

FAQ

Buyer Questions

What is the material of the Nd:YAG?
The material of the Nd:YAG is Nd:YAG.
What is the nd dopant level of the Nd:YAG?
The nd dopant level of the Nd:YAG is 0.1- 2.5(+/-0.1)atm%.
What is the orientation of the Nd:YAG?
The orientation of the Nd:YAG is or.
What is the dimension of the Nd:YAG?
The dimension of the Nd:YAG is Diameter:1-50mm, Length:0.3-220mm(upon customer’s request).
How do I get a quotation for the Nd:YAG?
Send the quantity, the specification and your destination port to Jiaxing AOSITE Photonics Technology Co.,Ltd. by email or telephone. There is no enquiry form on this site, so your message reaches an engineer directly rather than a contact queue.
Can the Nd:YAG be made to a custom specification?
Custom dimensions and finishes are quoted case by case against your drawing or written specification. Send what you need and the factory will confirm what is achievable, and at what tolerance, before you place the order.
Who manufactures the Nd:YAG?
Jiaxing AOSITE Photonics Technology Co.,Ltd., trading as OST Photonics, manufacturing in Jiaxing, Zhejiang, China since 2010.

Tell Us What You Need

Send your specification, quantity and destination port. Our engineers reply with a technical proposal and a confirmed lead time.