Building 5, Tian'An Park, No.36 Yongfeng Road, Qinghuai, Nanjing City, China
[email protected]
Oxygen TimesRequest A Quote
OHE20 stainless-steel hard-shell sitting chamber in a residential room

Home & Residential Wellness

A chamber that fits a spare room, runs single-handed and looks like furniture. Recommended Oxygen Times chamber models, room requirements, typical configurations and delivery capability for home & residential wellness.

Request A QuoteTalk To An Engineer
Side view of the Oxygen Times soft-shell sitting chamber in a living space

Industry application

Home & Residential Wellness

A chamber that fits a spare room, runs single-handed and looks like furniture

Industry pain points

What Makes This Setting Different

The room is the constraint

Most homes have a 3 x 4 m spare room, a normal doorway and no lift. Anything that needs civil works is out before price is discussed.

Nobody is there to operate it

A home user is alone in the chamber. Pressurisation, session timing and depressurisation have to be simple enough to run without an attendant.

Noise carries in a house

A compressor that is acceptable in a clinic corridor is not acceptable next to a bedroom.

Getting in and out

Floor-level entry is awkward for older users - the reason so many residential buyers end up choosing a sitting chamber.

What buyers need

The Requirements That Actually Decide It

  • Footprint and access dimensions confirmed against the actual room before ordering
  • Single-operator workflow with intuitive controls
  • Quiet oil-free compressor operation
  • Finish and colour that suits a living space, not a workshop

Recommended models

Chambers That Suit This Setting

Oxygen Times soft-shell sitting hyperbaric chamber set up in a residential room

OTS15 Spacious Sitting Chamber

Spacious upright, folding chair · Sit, 1 person · Spacious upright sitting chamber at 1.5 ATA with panoramic windows and room to read, work or relax.

View details →
OTS15P premium sitting hyperbaric chamber in blue with panoramic window

OTS15P Premium Sitting Chamber

230 cm interior · Sit or lie, 1 person · Premium spacious sitting chamber with a memory-foam mattress and a shoe-style dual-use sit-or-lie interior.

View details →
OTL15 lying chamber in black and white with the All-in-One gas unit

OTL15 Lying Chamber

Ø800–900 × 2000–2200 mm · Lie down, 1 person · Versatile lie-flat soft-shell chamber in three diameters, switchable between 1.3 and 1.5 ATA.

View details →
OTSA15 inflatable lying chamber with the All-in-One gas unit

OTSA15 Inflatable Lying Chamber

Air-column supported, Ø80 × 200 cm class · Lie down, 1 person · Compact inflatable lying chamber with an air-column support system — lightweight, quick to set up, stable at 1.5 ATA.

View details →
Oxygen Times soft-shell sitting hyperbaric chamber set up in a residential room

OTSE15 Egg-Shaped Sitting Chamber

Egg-shaped, extra headroom · Sit, recline or lie · Extra-spacious egg-shaped chamber that lets one adult sit upright, recline or lie down at a stable 1.5 ATA.

View details →

Typical scenarios

How These Rooms Are Usually Configured

Spare bedroom conversion

The OTS15 at 230 x 115 x 125 cm and the OTSA15 at 800 x 2000 mm both fit a standard spare room with clearance to walk around the unit.

Existing home gym

The OTL15 in the Ø800 x 2000 mm size sits alongside gym equipment and folds away when the room is needed for something else.

Master suite or wellness room

The OTS15P adds a memory-foam mattress and a dual-use sit-or-lie interior for a room where the chamber is a fixture.

Delivery capability

What We Handle From Order To Installation

  • Send room dimensions, door width and floor level before ordering
  • 10 to 30 days production and testing, then air or sea freight
  • Setup guidance and after-sales support over WhatsApp
  • Repair kit, spare hoses and consumables supplied with the chamber

Buyer questions

Home & Residential Wellness Questions

What size room do I need?
Take the chamber footprint from the product page and add roughly 60 cm on the entry side and 40 cm around the rest for access and the gas unit. A 230 cm chamber therefore wants about 3 m of clear wall.
Can one person set it up?
Soft-shell chambers are designed for straightforward setup, but the frame models are easier with two people for the initial assembly. After that, daily operation is a single-person job.
How loud is it?
The systems use quiet oil-free compressors. The OTS15P specification lists a noise level of 50 dB or below; other models are described as low-noise without a published figure, so ask for the measured value for the exact model you are considering.
Can I buy just one unit?
Yes. The minimum order quantity is one unit across the range, including OEM colour customisation.

Related Guides And Solutions

ATA Pressure Explained For Hyperbaric Chamber Buyers

What 1.3, 1.5, 1.9 and 2.0 ATA mean in practice, and how to pick the pressure band before you shortlist a chamber.

How To Size A Hyperbaric Chamber For Your Users

Diameter, length and entry height decide who actually fits. A dimension-by-dimension guide across all seventeen models.

Hyperbaric Chamber Maintenance And Daily Operation

Zippers, filters, seals and gauges - what to check daily, monthly and before every session.

Chamber Room Planning & Installation

Get the room, the access route and the power right before the chamber ships

Distributor & Agent Partnership

Factory-direct supply, stocked spares and technical backup for your market

Talk to the factory

Specify A Chamber For Home & Residential Wellness

Send the room dimensions, the intended users and how often the chamber will run. We will shortlist models and confirm lead time and freight.

Most enquiries answered within 12 hours · OEM and wholesale welcome

Tell Us What You Need

Send your specification, quantity and destination port. Our engineers reply with a technical proposal and a confirmed lead time.

Request A QuoteEmail Us