17.5X6.75

Home / Wheels and Rims / Forged Aluminium Wheels / 17.5X6.75

17.5X6.75 is a magnesium aluminum rim designed for medium-duty truck and bus applications. It features a 6.75 inch width and 17.5 inch diameter, suitable for use on rear axles and trailer po

Overview

17.5X6.75 is a magnesium aluminum rim designed for medium-duty truck and bus applications. It features a 6.75 inch width and 17.5 inch diameter, suitable for use on rear axles and trailer positions. The rim profile supports stable mounting on radial and bias tyres, with a reinforced center hole and bolt pattern for consistent load distribution. It is built for use in regional transport and distribution fleets operating on paved and mixed road surfaces.

• ISO9001
• ISO/TS16949
• CCC
• E-mark
• DOT
• GSO/GCC
• SONCAP
• INMETRO
• NOM

What 17.5X6.75 Gives the Operator

Lightweight magnesium aluminum construction reduces unsprung mass and improves fuel efficiency

6.75 inch width provides stable contact with the tyre bead for secure mounting

225 mm bolt circle with 4 holes and 26 mm bolt hole size ensures compatibility with common truck wheel hubs

176 mm center hole fits standard axle shafts used in medium-duty trucks and buses

141 valve type allows for easy air pressure management and compatibility with standard valve caps

Application Scenarios

• Regional distribution fleets using medium-duty trucks on paved and lightly graded roads
• Bus operators maintaining rear axle wheels with consistent load handling and low maintenance
• Trailer manufacturers fitting durable, lightweight rims for long-haul and regional transport

Who It Is For

• Truck and bus importers sourcing rims for medium-duty vehicles in Europe, Africa, and Latin America
• Fleet operators replacing worn rims on rear axles and trailers with lightweight alternatives
• Distributors requiring a standard rim size with consistent bolt pattern and load rating for container consolidation

What It Is Meant To Fix

Heavy steel rims increasing fuel consumption and reducing vehicle efficiency

Inconsistent bolt patterns causing fitment issues during wheel replacement

Rims with low load capacity failing under repeated axle loading in commercial use

Poor bead seat stability leading to air leaks and tyre detachment during high-speed operation

Published Data For 17.5X6.75

These are the figures published for this product. Anything not listed here is confirmed in writing before an order.

• Model 17.5*6.75
• Rated Load 3000kg
• Distributed Circle (PCD) ø225
• Bolt Hole ø26
• Center Hole ø176
• Screw Hole Type 1×45°
• Wind Hole Type 120
• Valve Type 141

Technical Features

• 17.5 inch diameter and 6.75 inch width for standard fitment on medium-duty truck and bus tyres
• Rated load capacity of 3000 kg at maximum recommended pressure
• 225 mm bolt circle (PCD) with 4 bolt holes and 26 mm diameter bolt holes
• 176 mm center hole for standard axle shaft fitment
• 1×45° screw hole type for secure fastening and alignment
• 120° wind hole type for balanced rim strength and manufacturing consistency
• 141 valve type for standard valve stem compatibility and pressure control

Customisation

• Rim finish options available upon request, including painted or bare metal
• Custom marking on the rim flange for fleet or distributor branding
• Container loading planned across rim sizes and patterns in one shipment

Quality Control

• Dimensional inspection of each rim using calibrated measuring tools before packaging
• Visual and surface defect check for cracks, warping, or casting imperfections
• Production under ISO9001 and ISO/TS16949 systems with documented traceability

How It Compares

• Compared with A standard steel rim in the same size Lighter weight improves fuel economy and reduces wear on suspension components, but may have lower impact resistance
• Compared with A heavier aluminum rim with different bolt pattern This rim has a standard 225 mm PCD and 4-hole layout, improving compatibility with common truck hubs
• Compared with A rim with a different center hole size 176 mm center hole ensures fitment on standard axle shafts, reducing the need for adapters

Getting the Most Out Of It

• Mount only on vehicles where the axle and hub match the 225 mm PCD and 4-bolt configuration
• Ensure the rim is properly torqued to the manufacturer's specification to prevent loosening
• Inspect the bead seat and valve area regularly for damage or corrosion
• Use compatible valve stems and caps to maintain air pressure and prevent leaks

Related Products

17.5*6.00

22.5X9.00

22.5x11.75 Dual Polished

22.5x11.75 Coated

Industries That Use It

• Long Haul Freight

Related Guides

• Matching Tyres to Truck Wheels
• Steel Versus Aluminium Truck Wheels
• Tyre Storage and Handling Before Fitting

17.5X6.75 Questions

The rim is rated for a maximum load of 3000 kg at the recommended pressure

It has a 4-bolt pattern with a 225 mm bolt circle (PCD) and 26 mm bolt hole diameter

It is suitable for trailer and rear axle positions on medium-duty trucks and buses

This is a rim, not a tyre. Retreading applies to tyres, not rims. The rim can be reused if undamaged

Standard finish is bare metal. Painted or coated finishes are available on request

Yes. Orders are typically consolidated across rim sizes and patterns in a single container shipment

Get Pricing For 17.5X6.75

Send the sizes and quantity per size. We will confirm availability, the approval marking for your market and a container plan.