An NIBP replacement usually stalls halfway: the cuff is available and the connector is not, or the connector arrives and the bladder inside the cuff is the part that was leaking. This guide sets out the parts that make up the circuit so the rebuild can be ordered in one go.
Maintenance Guide · Ronseda Electronics Co., Ltd
The circuit is four parts, not one
A working NIBP circuit is a cuff, the bladder inside it, the tubing, and the connector that mates with the monitor. Ronseda lists 17 products across all four, including nylon cuffs, disposable cuffs, TPU and PVC bladders, TPU and PVC tubing, interconnect tubing, plastic connectors and metal connectors.
Because all four come from one catalogue the circuit can be rebuilt completely rather than partly, which is the difference between a bed back in service today and one waiting on a connector.
Sizing follows limb circumference
Every cuff carries a printed range mark. Size against the measured limb circumference, not against the patient's age or apparent build. A cuff used outside its range mark produces readings that clinicians stop trusting, and the instrument gets blamed for it.
Small limb cuffs matter most on neonatal and pediatric beds, where using the next size up is not a workable compromise.
Single tube or double tube
The monitor decides this, not the cuff. Check the monitor's NIBP port before ordering: a double-tube cuff on a single-tube monitor cannot be adapted at the bedside.
Connector style is separate again — screw, push-fit and bayonet all appear across monitor brands. Where the marking is worn, a photograph identifies it faster than a model number.
Reusable or single-patient
Reusable nylon cuffs are the standard choice on general wards where the cuff is cleaned between patients. Disposable cuffs belong where infection-control policy rules out reprocessing.
Whichever you choose, order the bladder and tubing at the same time. They are the parts that fail first and the ones most often missing when a replacement is attempted.
Products Covered By This Guide
NIBP cuff with tubes (Nylon)
Model RSD-C006
TPU bladder
Model OA042
Holter leadwires
Model OA041
ECG socket
Model OA019
Multi-Parameter Patient Monitor 15 Inch
Model RSD8000
Multi-Parameter Patient Monitor 12.1 Inch
Model RSD 7000
Categories Referenced
Questions About This Guide
Ask us to confirm the part before you order
Send the monitor model, or a photograph of the socket and the part being replaced. We reply with the part number and the price basis.
Product Photographs
Request a Quote
We reply to every enquiry within one business day. Write to us directly by email or WhatsApp — both reach our sales desk immediately.